for complex geometries
on milled features
available on prototypes
metals & plastics
What Is CNC Milling?
CNC milling is a way to cut metal and plastic into exact shapes. A computer controls spinning tools that remove material from a solid block. This makes your part match your design file perfectly. It's one of the most common ways to make custom parts. York teams use our CNC milling for brackets, enclosures, housings, and custom fixtures.
We Fixture Your Blank
A block of metal or plastic is clamped onto the mill table in a vise or custom fixture.
Spinning Cutters Remove Material
Tools move along X, Y, and Z axes to carve pockets, slots, and surfaces layer by layer.
Your Part Comes Off the Table
We deburr, inspect, and measure every feature before shipping.
Built for Milling Projects
From simple brackets to complex 5-axis contours — one shop handles it all with precision and speed.
Multi-Axis Expertise
We handle simple 3-axis brackets and complex 5-axis sculpted parts on the same floor. Undercuts, compound angles, and deep pockets — no problem.
CMM Inspection
Every critical dimension is verified before shipping. Your receiving team gets a documented inspection report — no guessing, no shortcuts.
Material Versatility
Aluminum, stainless steel, titanium, brass, copper, Delrin, PEEK, nylon, and polycarbonate. Over 30 materials in stock and ready to mill.
Fast Turnaround
Upload your file and get a response fast. Most milled parts ship in 5–10 days. Rush orders in as few as 3 days. We communicate directly — no layers of sales reps.
From Simple Brackets to Complex 5-Axis Parts
Deep pockets, thin walls, and compound angles. We take on what others won't.
In York, defense companies drive demand for cnc milling. Local teams working with BAE Systems Land & Armaments and Johnson Controls Navy Systems rely on precision 3 to 5-axis milling with tight-tolerance pockets and complex contours.
York also has a strong industrial-equipment presence that drives demand for precision 3 to 5-axis milling with tight-tolerance pockets and complex contours.
3-Axis Milling
Flat surfaces, pockets, slots, and drilled holes. Works great for brackets, mounting plates, enclosures, and any part with features on one side.
Most common4-Axis Milling
Parts that need cuts on multiple sides without removing them from the machine. Faster delivery and lower cost for angled or wrapped features.
Multi-side access5-Axis Milling
Complex curves, undercuts, and sculpted surfaces. Our 5-axis machines cut from almost any angle. Fewer setups, tighter tolerances.
±0.0005" capableLarge Format Milling
Parts up to 24" x 18" x 12". Oversized brackets, plates, and housings with the same precision as smaller parts.
Up to 24" travelMicro Milling
Fine features down to 0.005" with tight tolerances. Perfect for small medical devices, electronics, and intricate mechanical parts.
0.005" featuresHigh-Volume Production
From 1 prototype to 5,000+ production parts. Optimized toolpaths and fixturing keep quality consistent across every piece.
1 to 5,000+
5-Axis Aerospace Bracket — 7075-T6 Aluminum
Machined for an aerospace customer requiring tight positional tolerances on complex multi-angle features. Delivered in 4 business days with full first article inspection package.
critical features
mating interfaces
turnaround time
inspection pass rate
- Dimensional inspection report (CMM data included)
- Material certification & heat lot traceability
- First article inspection report (FAI)
- Certificate of Conformance per purchase order specs
Quality. Documentation. Precision.
Every milled part ships with the documentation and quality verification your team needs.
Full Documentation
Every order ships with everything your quality team needs.
- Dimensional inspection reports
- Material certs with heat lot traceability
- First article inspection reports
- Certificate of Conformance
Verified Quality (CMM)
We inspect before we ship. No exceptions.
- CMM inspection on every order
- NIST-traceable calibrated gauges
- ±0.001" standard, ±0.0005" critical
- Free DFM review on every upload
Multi-Axis Precision
Complex geometry handled with confidence.
- 3, 4, and 5-axis CNC milling
- Custom fixtures for tricky geometries
- Undercuts, thin walls & deep pockets
- Optimized toolpaths for surface quality
From CAD File to Shipped Parts
Three steps. No runaround. Built for speed and precision.
Get an Instant Quote
Send your STEP or IGES file. Select material, quantity, and finish. We review for manufacturability and respond fast.
We Mill & Inspect
Your parts run on our CNC mills. Every order gets CMM inspection. We verify every critical dimension before anything ships.
Ship with Docs
Parts ship with dimensional inspection reports, material certs, and full documentation. Everything your quality team needs.
Common Questions About CNC Milling
CNC Milling By City
How York's Top Industries Use CNC Milling
York's economy drives specific machining demand. Here's what we see from local teams.
Upload Your Milling Project
Complex pockets, thin walls, 5-axis contours — we handle it all. Upload your CAD file for a fast review.
No minimums · Single prototypes to production runs · Ships anywhere in the US