production in Everett & Renton
in Kent, WA
on every part
Seattle engineers
Production Machining in Seattle — Built for Recurring Orders
RivCut isn’t just a prototype shop. We run CNC production machining from 10 to 5,000+ parts for Seattle hardware teams — with consistent quality, dedicated tooling, blanket-order pricing, and predictable lead times month after month. If you’re a Seattle buyer who reorders the same part every quarter, RivCut is built for you.
Blanket POs & Repeat Runs
Blanket orders, locked-in pricing, and dedicated machine time for Seattle customers who reorder month after month. No requoting every cycle.
Build Once, Run Forever
Custom fixtures and locked tool offsets shave minutes off every cycle and lock in repeatability across thousands of parts.
10 to 5,000+ Parts
Bridge runs after prototype validation through low-volume production at 5,000+ parts. Same machinists, same QA, same parts at piece 1 and piece 5,000.
SPC + CMM on Every Lot
SPC monitoring, AS9102 first-article reports, and CMM inspection on every lot. Mill certs (EN 10204 3.1) ship with every shipment.
What Ships With Every Seattle Production Order
Most online CNC platforms are built for prototypes — instant quote, one-off, ship and forget. RivCut runs the other half of the manufacturing cycle: production machining for Seattle OEMs who’ve already validated their design and need a manufacturing partner who will hold tolerances on lot 50 the same way they did on lot 1. We dedicate machine capacity, lock in fixtures, and quote blanket orders so your reorders ship on schedule without re-negotiating every quarter.
Already running prototypes with us? Production rates kick in starting at 50 pieces.
6 CNC Services for Seattle Teams
From fast prototypes to full production runs — every service tailored for Seattle’s top industries.
CNC Milling
5-axis milling for Seattle aerospace brackets, rocket components, and hardware startup prototypes. Aluminum, titanium, and Inconel.
Learn More →CNC Turning
Precision-turned shafts, propulsion fittings, and aerospace pins for Seattle programs.
Learn More →Rapid Prototyping
First parts in 3 days for Seattle startups and R&D teams. Metal prototypes for design validation and testing.
Learn More →Production Runs
Production lots for Boeing supply chain and Seattle aerospace subcontractors. Consistent quality across every batch.
Learn More →DFM Design Support
Free DFM review for Seattle engineers. Optimize your aerospace bracket or hardware enclosure before cutting.
Learn More →Quality Assurance
CMM inspection and AS9100-compatible documentation for Seattle aerospace and space quality programs.
Learn More →Top Industries in Seattle
We machine precision parts for Seattle’s leading industries — with the materials, tolerances, and documentation each one demands.
Commercial Aerospace
Boeing’s 737 and 777X production in Renton and Everett anchors Seattle’s aerospace industry. We machine structural brackets, avionics housings, interior components, and wing fixtures for Boeing supply chain and MRO operations.
See Commercial Aerospace Parts →Space & Launch
Blue Origin builds rocket engines in Kent. Aerojet Rocketdyne and satellite companies maintain Puget Sound operations. We machine propulsion fittings, structural components, and payload fixtures for Seattle’s space industry.
See Space & Launch Parts →Hardware & Robotics
Amazon’s robotics division, Microsoft hardware, and Seattle’s hardware startup ecosystem need fast-turnaround machined parts. Enclosures, actuator housings, and custom brackets in days.
See Hardware & Robotics Parts →Why Seattle Teams Choose RivCut
Precision, speed, documentation, and direct engineering support — built for Seattle’s demanding industries.
Boeing Supply Chain
Puget Sound aerospace suppliers need AS9100-level documentation. CMM reports, material certs, and full traceability ship with every order.
Space-Grade Precision
Blue Origin and Aerojet programs demand parts that survive launch. We machine propulsion and structural components in aerospace alloys.
Hardware Speed
Amazon robotics and Seattle startups iterate fast. Upload your file, get machined parts in days. No minimums.
West Coast Logistics
We’re Bay Area-based with fast ground shipping to Seattle. Priority delivery for urgent aerospace and production orders.
From CAD File to Shipped Parts
Three steps. No runaround. Built for Seattle engineering timelines.
Upload Your CAD File
Send your STEP or IGES file. Select material, quantity, and finish. We review and respond fast.
We Machine & Inspect
Your parts run on our CNC mills and lathes. Every order gets CMM inspection before shipping.
Ship with Documentation
Parts ship with CMM reports, material certs, and traceability documentation. Ready for your quality team.
Questions from Seattle Teams
CNC Machining Materials Available in Seattle
Aluminum 6061 and 7075. Stainless 304, 316, and 17-4 PH. Ti-6Al-4V titanium. PEEK, Delrin, and Nylon 6/6. Every grade ships from our shop with a full mill cert.
| Aluminum | |
|---|---|
| 6061-T6 | 40 ksi yield, machinability ~190 |
| 7075-T6 | 73 ksi yield, aerospace structural |
| 2024-T3 | Fatigue resistant, airframe skins |
| 5052 | Marine-grade, formable |
| Steel | |
| 1018 | Low carbon, weldable |
| 4140 | Pre-hard 28–32 HRC, high strength |
| 4340 | Quenched & tempered, ultra-high strength |
| A36 | 36 ksi yield, structural |
| Stainless Steel | |
| 303 | Free-machining, sulfur-bearing |
| 304 | Austenitic, weldable, general purpose |
| 316 | Mo-bearing, marine and chemical grade |
| 17-4 PH | H900, ~190 ksi UTS |
| Titanium | |
| Grade 2 | CP titanium, weldable, biocompatible |
| Ti-6Al-4V (Grade 5) | 120 ksi yield, aerospace and medical |
| Brass & Copper | |
| C360 Brass | 100% machinability rating |
| C110 Copper | ~100% IACS conductivity |
| C101 Copper | Oxygen-free, ~101% IACS |
| Engineering Plastics | |
| Delrin (Acetal) | Low friction, dimensionally stable |
| PEEK | 250°C service temp, chemical resistant |
| Nylon 6/6 | Wear resistant, ~12 ksi tensile |
| UHMW | Impact resistant, low friction |
| Polycarbonate | Transparent, ~9 ksi tensile |
| PTFE (Teflon) | 260°C, chemically inert |
Don’t see your grade? Ask us — we machine 50+ alloys and polymers.
RivCut vs CNC Marketplaces vs Local Machine Shops
Why engineers in Seattle pick RivCut over marketplaces and local machine shops. Marketplaces are fast but route your job to the lowest bidder. Local shops are trustworthy but slow on quotes and often won’t take small jobs. RivCut combines instant online quoting with the accountability of a real, in-house USA shop.
| What You Get | RivCut Best | CNC Marketplace | Local Machine Shop |
|---|---|---|---|
| Who cuts the part | Our machinists in Union City, CA | Unknown 3rd party shop | Local machinist, varies by shop |
| Country of origin | 100% USA, never outsourced | Often shipped overseas | USA, local only |
| Instant online quote | Yes — AI-priced in seconds | Yes | No — email or phone quote |
| Talk to the machinist | Yes, direct line | No, support agent only | Yes, in person |
| Free DFM review | Yes, on every order | Sometimes, paid add-on | Sometimes, informal |
| Tightest tolerance | ±0.0002 inches | ±0.005 inches typical | Varies by shop |
| Fastest lead time | 3 business days | 5–10 business days | 2–4 weeks typical |
| Minimum order | None — one part is fine | Often 5+ pieces | Often $500+ minimum |
| CMM inspection | Every order | Paid upgrade | Sometimes, manual only |
What Engineers Say About
Working With RivCut
Real reviews from real engineers. Every project matters — including yours in Seattle.
We went through two shops before finding RivCut. Night and day difference. Parts come in right. Communication is clear. They held ±0.002" on a titanium bracket that two other shops couldn’t get right.
Aerospace PartsThey caught a tolerance issue in our drawing before production started. That saved us a full revision cycle and three weeks of delays. You don’t find that kind of attention to detail at most shops.
Medical DeviceWe needed fast turnaround on 5-axis parts for a new enclosure. RivCut delivered in 6 days. Quality was excellent. These guys move fast without cutting corners.
PrototypingThe DFM Checklist Engineers Use Before Sending CAD to a CNC Shop
14 checks for wall thickness, internal radii, tool reach, hole depth-to-diameter ratios, and tolerance stack. Catch issues before they cost you a revision cycle.
- ✓ 14-point pre-flight checklist
- ✓ Aluminum, steel & titanium-specific rules
- ✓ Printable PDF, no signup wall
Ready to Machine Your Parts?
Upload your CAD file and get a quote fast. Seattle teams trust RivCut for precision, speed, and documentation.