in Austin
in the Austin metro
on every part
for Austin teams
Production Machining in Austin — Built for Recurring Orders
RivCut isn’t just a prototype shop. We run CNC production machining from 10 to 5,000+ parts for Austin hardware teams — with consistent quality, dedicated tooling, blanket-order pricing, and predictable lead times month after month. If you’re a Austin buyer who reorders the same part every quarter, RivCut is built for you.
Blanket POs & Repeat Runs
Blanket orders, locked-in pricing, and dedicated machine time for Austin customers who reorder month after month. No requoting every cycle.
Build Once, Run Forever
Custom fixtures and locked tool offsets shave minutes off every cycle and lock in repeatability across thousands of parts.
10 to 5,000+ Parts
Bridge runs after prototype validation through low-volume production at 5,000+ parts. Same machinists, same QA, same parts at piece 1 and piece 5,000.
SPC + CMM on Every Lot
SPC monitoring, AS9102 first-article reports, and CMM inspection on every lot. Mill certs (EN 10204 3.1) ship with every shipment.
What Ships With Every Austin Production Order
Most online CNC platforms are built for prototypes — instant quote, one-off, ship and forget. RivCut runs the other half of the manufacturing cycle: production machining for Austin OEMs who’ve already validated their design and need a manufacturing partner who will hold tolerances on lot 50 the same way they did on lot 1. We dedicate machine capacity, lock in fixtures, and quote blanket orders so your reorders ship on schedule without re-negotiating every quarter.
Already running prototypes with us? Production rates kick in starting at 50 pieces.
6 CNC Services for Austin Teams
From fast prototypes to full production runs — every service tailored for Austin’s top industries.
CNC Milling
5-axis milling for Austin semiconductor fixtures, defense housings, and startup prototypes. Complex geometries in aluminum, steel, and titanium.
Learn More →CNC Turning
Precision-turned shafts, pins, and bushings for Austin tech companies. Swiss turning available for small-diameter parts.
Learn More →Rapid Prototyping
First parts in 3 days for Austin hardware startups and R&D teams. Real metal prototypes — not 3D prints.
Learn More →Production Runs
Repeatable production runs from 50 to 5,000+ parts for Austin semiconductor and defense contractors. Consistent tolerances across every lot.
Learn More →DFM Design Support
Free DFM review for Austin engineers. We flag manufacturability issues before cutting — saving 20–40% on typical projects.
Learn More →Quality Assurance
CMM inspection on every order. Dimensional reports, material certs, and traceability documentation that Austin defense and semiconductor teams require.
Learn More →Top Industries in Austin
We machine precision parts for Austin’s leading industries — with the materials, tolerances, and documentation each one demands.
Semiconductor
Austin hosts Samsung’s $17B chip fab, NXP Semiconductors, Cirrus Logic, and Silicon Labs. We machine wafer handling fixtures, chamber components, and process equipment parts for Austin’s growing fab ecosystem.
See Semiconductor Parts →Defense & Aerospace
BAE Systems, L3Harris, and Elbit Systems operate in Austin. We machine housings, brackets, sensor mounts, and structural components for defense programs with full documentation.
See Defense & Aerospace Parts →Hardware Startups
Austin’s startup scene needs fast prototyping. From enclosures to heat sinks to custom brackets, we turn CAD files into machined parts in days — no minimums.
See Hardware Startups Parts →Why Austin Teams Choose RivCut
Precision, speed, documentation, and direct engineering support — built for Austin’s demanding industries.
Silicon Hills Ready
We machine the exotic alloys and tight tolerances that Austin’s semiconductor and chip fab teams need — Invar, Kovar, 316L stainless, and more.
Startup Speed
Austin’s hardware startups move fast. Upload your CAD file and get a quote in hours, parts in days. No minimums, no long lead times.
Defense Documentation
Austin defense contractors need full traceability. Every order ships with CMM inspection reports, material certs, and process documentation.
Local Engineering Support
Talk directly to the engineer machining your parts. No sales layers. We speak your language — whether it’s GD&T, ASME Y14.5, or startup speed.
From CAD File to Shipped Parts
Three steps. No runaround. Built for Austin engineering timelines.
Upload Your CAD File
Send your STEP or IGES file. Select material, quantity, and finish. We review and respond fast.
We Machine & Inspect
Your parts run on our CNC mills and lathes. Every order gets CMM inspection before shipping.
Ship with Documentation
Parts ship with CMM reports, material certs, and traceability documentation. Ready for your quality team.
Questions from Austin Teams
CNC Machining Materials Available in Austin
Aluminum 6061 and 7075. Stainless 304, 316, and 17-4 PH. Ti-6Al-4V titanium. PEEK, Delrin, and Nylon 6/6. Every grade ships from our shop with a full mill cert.
| Aluminum | |
|---|---|
| 6061-T6 | 40 ksi yield, machinability ~190 |
| 7075-T6 | 73 ksi yield, aerospace structural |
| 2024-T3 | Fatigue resistant, airframe skins |
| 5052 | Marine-grade, formable |
| Steel | |
| 1018 | Low carbon, weldable |
| 4140 | Pre-hard 28–32 HRC, high strength |
| 4340 | Quenched & tempered, ultra-high strength |
| A36 | 36 ksi yield, structural |
| Stainless Steel | |
| 303 | Free-machining, sulfur-bearing |
| 304 | Austenitic, weldable, general purpose |
| 316 | Mo-bearing, marine and chemical grade |
| 17-4 PH | H900, ~190 ksi UTS |
| Titanium | |
| Grade 2 | CP titanium, weldable, biocompatible |
| Ti-6Al-4V (Grade 5) | 120 ksi yield, aerospace and medical |
| Brass & Copper | |
| C360 Brass | 100% machinability rating |
| C110 Copper | ~100% IACS conductivity |
| C101 Copper | Oxygen-free, ~101% IACS |
| Engineering Plastics | |
| Delrin (Acetal) | Low friction, dimensionally stable |
| PEEK | 250°C service temp, chemical resistant |
| Nylon 6/6 | Wear resistant, ~12 ksi tensile |
| UHMW | Impact resistant, low friction |
| Polycarbonate | Transparent, ~9 ksi tensile |
| PTFE (Teflon) | 260°C, chemically inert |
Don’t see your grade? Ask us — we machine 50+ alloys and polymers.
RivCut vs CNC Marketplaces vs Local Machine Shops
Why engineers in Austin pick RivCut over marketplaces and local machine shops. Marketplaces are fast but route your job to the lowest bidder. Local shops are trustworthy but slow on quotes and often won’t take small jobs. RivCut combines instant online quoting with the accountability of a real, in-house USA shop.
| What You Get | RivCut Best | CNC Marketplace | Local Machine Shop |
|---|---|---|---|
| Who cuts the part | Our machinists in Union City, CA | Unknown 3rd party shop | Local machinist, varies by shop |
| Country of origin | 100% USA, never outsourced | Often shipped overseas | USA, local only |
| Instant online quote | Yes — AI-priced in seconds | Yes | No — email or phone quote |
| Talk to the machinist | Yes, direct line | No, support agent only | Yes, in person |
| Free DFM review | Yes, on every order | Sometimes, paid add-on | Sometimes, informal |
| Tightest tolerance | ±0.0002 inches | ±0.005 inches typical | Varies by shop |
| Fastest lead time | 3 business days | 5–10 business days | 2–4 weeks typical |
| Minimum order | None — one part is fine | Often 5+ pieces | Often $500+ minimum |
| CMM inspection | Every order | Paid upgrade | Sometimes, manual only |
What Engineers Say About
Working With RivCut
Real reviews from real engineers. Every project matters — including yours in Austin.
We went through two shops before finding RivCut. Night and day difference. Parts come in right. Communication is clear. They held ±0.002" on a titanium bracket that two other shops couldn’t get right.
Aerospace PartsThey caught a tolerance issue in our drawing before production started. That saved us a full revision cycle and three weeks of delays. You don’t find that kind of attention to detail at most shops.
Medical DeviceWe needed fast turnaround on 5-axis parts for a new enclosure. RivCut delivered in 6 days. Quality was excellent. These guys move fast without cutting corners.
PrototypingThe DFM Checklist Engineers Use Before Sending CAD to a CNC Shop
14 checks for wall thickness, internal radii, tool reach, hole depth-to-diameter ratios, and tolerance stack. Catch issues before they cost you a revision cycle.
- ✓ 14-point pre-flight checklist
- ✓ Aluminum, steel & titanium-specific rules
- ✓ Printable PDF, no signup wall
Ready to Machine Your Parts?
Upload your CAD file and get a quote fast. Austin teams trust RivCut for precision, speed, and documentation.